Saturday, November 26, 2011

IP Addressing and Subnetting                                                                             


Cisco Subnetting Guide

http://www.4shared.com/document/moDMGvHj/ipaddressing.html

Other sources

http://www.learntosubnet.com/

CCNA Day-2                                              


Day 2   :  http://www.4shared.com/document/U6h-9cuG/Day_2.html

1)


2) Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts? (Choose three)
A – 15.234.118.63
B – 92.11.178.93
C – 134.178.18.56
D – 192.168.16.87
E – 201.45.116.159
F – 217.63.12.192


3) Which of the following host addresses are members of networks that can be routed across the public Internet? (Choose three)
A – 10.172.13.65
B – 172.16.223.125
C – 172.64.12.29
D – 192.168.23.252
E – 198.234.12.95
F – 212.193.48.254


4) Which of the following IP addresses fall into the CIDR block of 115.64.4.0/22? (Choose three)
A – 115.64.8.32
B – 115.64.7.64
C – 115.64.6.255
D – 115.64.3.255
E – 115.64.5.128
F – 115.64.12.128


5) Refer to the diagram. All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network? (Choose three)
VLAN_IP_Assignment.jpg
A – The subnet mask in use is 255.255.255.192.
B – The subnet mask in use is 255.255.255.128.
C – The IP address 172.16.1.25 can be assigned to hosts in VLAN1.
D – The IP address 172.16.1.205 can be assigned to hosts in VLAN1.
E – The LAN interface of the router is configured with one IP address.
F – The LAN interface of the router is configured with multiple IP addresses.


 6)Refer to the exhibit. In this VLSM addressing scheme, what summary address would be sent from router A?
VLSM_summary.jpg
A. 172.16.0.0/16
B. 172.16.0.0/20
C. 172.16.0.0/24
D. 172.32.0.0/16
E. 172.32.0.0/17
F. 172.64.0.0/16



7) On the network 131.1.123.0/27, what is the last IP address that can be assigned to a host?

A. 131.1.123.30
B. 131.1.123.31
C. 131.1.123.32
D. 131.1.123.33


8) For the network 192.0.2.0/23, which option is a valid IP address that can be assigned to a host?
A. 192.0.2.0
B. 192.0.2.255
C. 192.0.3.255
D. 192.0.4.0


9) How many addresses for hosts will the network 124.12.4.0/22 provide?
A. 510
B. 1022
C. 1024
D. 2048


10) The network default gateway applying to a host by DHCP is 192.168.5.33/28. Which option is the valid IP address of this host?
A. 192.168.5.55
B. 192.168.5.47
C. 192.168.5.40
D. 192.168.5.32
E. 192.168.5.14


11) Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0? (Choose two)
A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.2.255
E. 17.35.36.0


12) Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? (Choose two)

A. Replace the straight-through cable with a crossover cable.
B. Change the subnet mask of the hosts to /25.
C. Change the subnet mask of the hosts to /26.
D. Change the address of Workstation A to 192.0.2.15.
E. Change the address of Workstation B to 192.0.2.111.


13) Your ISP has given you the address 223.5.14.6/29 to assign to your router’s interface. They have also given you the default gateway address of 223.5.14.7. After you have configured the address, the router is unable to ping any remote devices. What is preventing the router from pinging remote devices?

A. The default gateway is not an address on this subnet.
B. The default gateway is the broadcast address for this subnet.
C. The IP address is the broadcast address for this subnet.
D. The IP address is an invalid class D multicast address.


14) Refer to the exhibit. The user at Workstation B reports that Server A cannot be reached. What is preventing Workstation B from reaching Server A?
subnetting_gateway.jpg

A. The IP address for Server A is a broadcast address.
B. The IP address for Workstation B is a subnet address.
C. The gateway for Workstation B is not on the same subnet.
D. The gateway for Server A is not on the same subnet.



15) Given the address 192.168.20.19/28, which of the following are valid host addresses on this subnet? (Choose two)
A. 192.168.20.29
B. 192.168.20.16
C. 192.168.20.17
D. 192.168.20.31
E. 192.168.20.0


16) You are working in a data center environment and are assigned the address range 10.188.31.0/23. You are asked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hosts each.Which IP address range meets these requirements?

A. 10.188.31.0/27
B. 10.188.31.0/26
C. 10.188.31.0/29
D. 10.188.31.0/28
E. 10.188.31.0/25


17) In the implementation of VLSM techniques on a network using a single Class C IP address, which subnet mask is the most efficient for point-to-point serial links?
A. 255.255.255.240
B. 255.255.255.254
C. 255.255.255.252
D. 255.255.255.0
E. 255.255.255.248


18)  Refer to the exhibit. HostA cannot ping HostB. Assuming routing is properly configured, what could be the cause of this problem?
subnetting_2.jpg
A. HostA is not on the same subnet as its default gateway.
B. The address of SwitchA is a subnet address.
C. The Fa0/0 interface on RouterA is on a subnet that can’t be used.
D. The serial interfaces of the routers are not on the same subnet.
E. The Fa0/0 interface on RouterB is using a broadcast address.


19) The network administrator is asked to configure 113 point-to-point links. Which IP addressing scheme best defines the address range and subnet mask that meet the requirement and waste the fewest subnet and host addresses?
A. 10.10.0.0/18 subnetted with mask 255.255.255.252
B. 10.10.0.0/25 subnetted with mask 255.255.255.252
C. 10.10.0.0/24 subnetted with mask 255.255.255.252
D. 10.10.0.0/23 subnetted with mask 255.255.255.252
E. 10.10.0.0/16 subnetted with mask 255.255.255.252


20) If an Ethernet port on a router was assigned an IP address of 172.1.1.1/20, what is the maximum number of hosts allowed on this subnet?
A. 4094
B. 1024
C. 8190
D. 2046
E. 4096




CCNA Day-1                                                                 


Teaching Slides
Slide -1  http://www.4shared.com/document/sEfPfZEI/day1-1.html

Slide -2 http://www.4shared.com/document/r-FW7LWp/day1-2.html
1) Which of the following statements describe the network shown in the graphic? (Choose two)

A   There are two broadcast domains in the network.
B. There are four broadcast domains in the network.
C. There are six broadcast domains in the network.
D. There are four collision domains in the network. 
E. There are five collision domains in the network.
F. There are seven collision domains in the network.



2) For what two purposes does the Ethernet protocol use physical addresses? (Choose two)    A. to uniquely identify devices at Layer 2
   B. to allow communication with devices on a different network
   C. to differentiate a Layer 2 frame from a Layer 3 packet
   D. to establish a priority system to determine which device gets to transmit first
   E. to allow communication between different devices on the same network
   F. to allow detection of a remote device when its physical address is unknown


3) Refer to the exhibit. The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three)
troubleshoot_physical_layer.jpg
A. Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B. Ensure that cables A and B are straight-through cables.
C. Ensure cable A is plugged into a trunk port.
D. Ensure the switch has power.
E. Reboot all of the devices.
F. Re-seat all cables.


4) For which type of connection should a straight-through cable be used?
   A. switch to switch
   B. switch to hub
   C. switch to router
   D. hub to hub
   E. router to PC


5) Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?
   A. crossover
   B. straight-through
   C. rolled
   D. shielded twisted-pair